Band 100khz-1.7ghz R820t2 Aerospace Software Converter Tuner Receiver Rtl.sdr Up Broadband Full Urban Hollie Rating: 5 out of 5
Terrific goods could boost the quality of your life. Qualified to be acquired. Affordable cost and free delivery. Let's get Band 100khz-1.7ghz R820t2 Aerospace Software Converter Tuner Receiver Rtl.sdr Up Broadband Full prior to prices increase.
When you use it, an excellent item or service is created and also provided of program to supply comfort and also make you comfy. There are many means to get a high quality product. The swiftly growing online world makes it easier for you to look for items to your preference and needs. Among these products is really very understanding of your needs for this unique goods. High technology-made products offer the customers the advantage they want.
No comment...
Note:
1.Due to the difference between different monitors,there are color differences,pls understand.
2.Please allow 1-3mm errors due to manual measurement.
3.This product can only receive FM radio and the nearby radio signal, can not receive shortwave. If you want to receive shortwave, you can buy matching antenna.
Built-in up-converter 100KHz-1.7GHz wideband SDR receiver.Built-in 100Mhz up converter, you can use the R820T2 built-in high-level, so that the use of short-wave than the use of Q-channel lead SDR have a higher sensitivity. The use of DBM balanced ring mixer makes the shortwave noise lower, there is a greater dynamic range. Can eliminate the direct sampling of the unique aliasing sampling phenomenon.Can be connected to the computer, Andrews and other devices using SDR software to receive 100KHz-1.7GHz electromagnetic waves to support AM, FM (NFM, WFM), CW, DSB, LSB, USB demodulation. Can listen to shortwave single sideband communication, FM radio, walkie-talkie calls, aviation bands and so on.[R820T2 tuner has a slightly better sensitivity than the R820T, lower noise floor, higher signal to noise ratio. Can work more stably around the frequency of 1.5 GHz. To[Through software can crack analog yin, digital tone. To[You can set the automatic search scan. To[Can break the digital radio through the software ID and demodulate the voice signal]RTL.SDR + Up Converter technical features.1. Provide the machine can be used to connect2. Use the RTL2832U + R820T2 chipset R820t2 tuner has a slightly better sensitivity than r820t, lower noise floor, higher signal to noise ratio. Can work more stably around the frequency of 1.5 GHz. 3.100KHz-1766MHz, operating frequency range4. Cover all shortwave amateur bands5. VHF and UHF bands are covered from 24-1766MHz6. Sampling rate up to 3.2MHz. (2.8MHz stable)7. The received modes include NFM, FM, DSB, USB, LSB, and CW Note: Depends on the SDR software used.8.8bit ADC sampling provides up to 50 dB dynamic range.9. 50 ohm input impedance.10. Double SMA gold plated antenna connector.11. Diode-limited RF input protection.12. Aluminum shielded housing.13.LED lamp band switching indication.14.100MHz local oscillator.15.DBM Balanced Ring Mixer16. Small size17. Free software18. Independent antenna input HF and UV19.USB computer connection (powered by USB)20. Very high dynamic range, higher sensitivity.21. RF switching chip switching band.22. All specifications are subject to change without noticeReceive the air band. AM mode, using the auto scan function to scan the entire air band
Http://v.youku.com/v_show/id_XMTI5MTIxMjg0OA==.html
Package includes: 1 x Built-in up-converter 100KHz-1.7GHz wideband SDR receiver
Operation on HF.
• Click in ON Shift box
• make sure you enter the correct SHIFT frequency (minus) -100 000 000 (or -40 000000)
unit is the Hz note 1.
• Switch on SDR toggle switch, Red LED will light
• Tune your SDR Sharp on the bands.
• Reception on this mode from 100KHz to 30MHz
• Input antenna is HF
Note 1: Lo frequency is marked in the equipment shell.
Operation on VHF and UP:
• Click OFF the Shift box
• Switch off the SDR toggle switch. Green LED off • Tune SDR on the band you wish to receive
• Reception from 25MHz to 1.766GHz
• Input antenna is UV
ANTENNA CONNECTION
Frequency offset settings for HDSDR
click Options or press F7, select RF Front-End+Calibration
In the select the options within the red line, make sure that the
input offset frequency100 000 000(or 40 000000) unit is the Hz note 1.
correct. The first to cancel the selection back to the default.
QUICK START GUIDE
This page is a guide aimed at helping anyone set up a cheap radio scanner based on the RTL-SDR software defined radio as fast as possible on a Windows system. http://www.rtl-sdr.com/rtl-sdr-quick-start-guide/
SDRSharp Guide
A good guide to learning how to use SDRSharp and what all the options do can be found here.
http://www.atouk.com/SDRSharpQuickStart.html
Another great illustrated guide can be found here. http://tylerwatt12.com/tips-for-using-sdr/
No comments:
Post a Comment